Our gravity and conveying
diverters are designed for reliable operation and long life. One
of the most important features of a diverter is not part of the valve itself.
The most important feature is optimal valve selection based on your process
requirements. B&W has 50 years of experience selecting, designing
and manufacturing diverter valves. With our own foundry and 20,000
square foot machine shop, B&W is able to produce custom valves of all
types.
For more information on this product line,
please visit our PDF Document Library.
DG Gravity
Diverters for gravity flow applications. Mild or stainless steel
construction. Standard sizes from 4" to 12" and up to 24" custom
designs. Round or square flanges. Optional internal dust seals.
Standard leg angles (measured from vertical) are: 0°/30°
and 30°/30°, but almost any angle can be accommodated. Available
in 2-way and 3-way designs.
DM Conveying Diverters
for gravity feed, dilute or dense phase pneumatic conveyors. Available
with flanged or tube connections for abrasive applications, polyurethane
liners and hardened steel flaps are available. Sizes from 2" to 12"
in cas iron, cast aluminum or cast stainless steel.
Twin-Outlet
Diverting Rotary Valve combines the function of a rotary feeder/airlock
and diverter valve in one simple mechanism. Select left or right
discharge by changing rotor direction via motor and reversing switch.
Only one moving part. Very compact. Exclusive tapered rotor
allows rotor gap to be easily adjusted. Heavy cast aluminum, iron
or stainless steel valve body. Adjustable packing gland shaft seals
-- purge available. Heavy duty permanently sealed outboard roller
bearings. Ideal for vacuum or pressure conveying systems. Available
in five sizes with capacities up to 2,500 cubic feet per hour.
DBS Slide Box Diverters
are unique and have proven themselves in applications requiring dust-tight
operation. Friable products such as tobacco are perfect for this
valve because there is no place for product to hang up. A smooth
bore is all the product contacts when being conveyed through this diverter.
On-the-fly diverting is possible under many conditions. Available
in sizes from 2" to 6" in cast iron, cast aluminum, cast stainless steel
and, for abrasive applications, Ni-hard.
DP Plug Diverters
are used on all types of pneumatic systems because of their simplicity
and reliability. The machined plug with a bored "Y" through the center
rotates in the machined body to divert flow. On-the-fly diverting
is possible under many conditions. Available in sizes from 3" to
12" in cast iron, cast aluminum or cast stainless steel.
DS Double Slide Gate
Diverters are used where the two legs must operate independently.
This is the only diverter (other than the pinch valve) that can close both
legs at the same time. Available in sizes 6" to 12" in aluminum,
mild or stainless steel.
AKO Pinch Valve Diverters
are used in abrasive applications such as cement. The simplicity
of two (or more) pinch valves allows independent operation of the diverter
legs. Simple operation and a smooth bore makes these diverters ideal
for dense or dilute phase pneumatic systems. Available in sizes 1.5"
to 8".
Twin-Outlet
Diverting Rotary Valve combines the function of a rotary feeder/airlock
and diverter valve in one simple mechanism. Select left or right
discharge by changing rotor direction via motor and reversing switch.
Only one moving part. Very compact. Exclusive tapered rotor
allows rotor gap to be easily adjusted. Heavy cast aluminum, iron
or stainless steel valve body. Adjustable packing gland shaft seals
-- purge available. Heavy duty permanently sealed outboard roller
bearings. Ideal for vacuum or pressure conveying systems. Available
in five sizes with capacities up to 2,500 cubic feet per hour.
